KX-HCM280
New type Network Camera with a wide range of sight.
Remote Pan/Tilt/Zoom/Focus

 
 
  • 21x optical zoom
  • 380,000 pixel CCD image sensor
  • High speed Pan/Tilt operation
  • Viewing Images from the Network Camera on TV
  • Multi-Camera Screen
  • A wealth of Network Camera control functions
  • External I/O
  • "Transfer in the Alarm mode",
    "Transfer in the Timer mode"
  • Viewnetcam.com compatible. "NEW"
    (FREE DDNS Service)
  • Viewing still images on your mobile phone "NEW"
 
 
  1. 21x optical zoom with an automatic and manual focusing features
    The Network Camera has a 21x optical zoom and automatic and manual focusing features to provide you with detailed and distinct images.      --< Zoom image ( sample ) >--

     
  2. High-Speed Motion JPEG
    The Network Camera employs a 380,000 pixel CCD image sensor, and has an integrated web server. Motion JPEG displays up to 30 frames per second, if the network provides enough bandwidth. To conserve bandwidth, JPEG - Regularly Refresh can be selected from Top Page. Image Resolution, Image Quality, Refresh interval, Limit time of Continuous Motion JPEG and On the Air time features can control the image field.

    (*) Scan lines may deviate when viewing moving objects with resolution at 640 x 480 because of the interlace-type CCD.

     
  3. High speed Pan/Tilt operation
    The KX-HCM280 allows you to monitor a wide range of sight that has been traditionally impossible to monitor with just one Network Camera.
    Changing swiftly the direction of the Network Camera for the fast-moving object.

     
  4. Viewing Images from the Network Camera on TV
    You can view images from the Network Camera on TV and to record them on videotapes.

    (*) Please purchase the Video cable (Customer provided).
    (*) You cannot control the Network Camera.
    (*) Analog Port (USA Only).

     
  5. Multi-Camera Screen
    Using Multi-Camera screen, you can simultaneously access up to four Network Cameras at various locations. Requires no operations that enter the address to switch among cameras. You do not need to install or set special software.

    (*) You can switch the motion image to the still image to reduce the network load. It is a convenient function to use the Internet under the transmission speed of 100 Kbps (standard).
    (*) You cannot use this function on a mobile phone.

     
  6. A wealth of Network Camera control functions
     
    • Pan Scan
      You can move the Network Camera in a horizontal direction.
      (*) You cannot use this function on a mobile phone.
    • Tilt Scan
      You can move the Network Camera in a vertical direction.
      (*) You cannot use this function on a mobile phone.
    • Remote Pan/Tilt operation
      Changing the direction of the Network Camera on a web browser.
       Pan: -175ｰ to +175ｰ /Tilt: -120ｰ to +90ｰ
    • Zooming features
      Zoom button increases or decreases the size of the object.
    • Preset Positioning
      Preset Positioning allows you to fix the Network Camera in a specific direction.
      (*) You can set 8 directions each on your PC and mobile phone.
    • Focus control
      Manual focusing starts by pressing Near or Far button.
    • Click to Center
      When you click the certain point on the Single Camera screen, the point is centered on the image.
      (*) Excepting the case that it is needed the operation over the movable range of the direction of the Network Camera.
      (*) You cannot use this function on a mobile phone.


     

  7. External I/O
    The Alarm mode in the Image Transfer feature requires that external sensors/devices be connected to the External Sensor Input of the External I/O. You can transfer images as the sensor is detected when set to "Transfer in the Alarm mode".

     
  8. 典ransfer in the Timer mode
    • 典ransfer in the Alarm mode
        Transferring the image via e-mail or FTP when the alarm trigger is active.
        Notification by e-mail without transferring the image.
    • 典ransfer in the Timer mode
        Transferring the image via e-mail or FTP when the timer trigger is active.
            The timer trigger can be activated by entering the active time on the Image Transfer window.
        The timer mode uses the Network Camera internal clock.
            Please make sure Date and Time have been configured.
       

    Also, you can save about 560 frames(*1) to the integrated memory. You can save images to specify a day of the week, time and refresh interval of recording.

    (*1) At a resolution of 320x240 in standard mode (When the file size is 13KB per image)
    (*) You cannot use this function on a mobile phone.

     

  9. Viewnetcam.com compatible (FREE DDNS service) "NEW"
    You can get your personal web address for your Panasonic Network Camera.
    It's FREE of charge! Please access www.viewnetcam.com for more information.



     
  10. Viewing still images on your mobile phone "NEW"
    A compatible mobile phone allows you to view still images over the Internet as well as control the motion and zoom settings of the camera.
    Please refer to the technical information for more details.


     
 
 
 
 
 
Server
Product Type web-server-integrated Indoor type Network Camera
Video Compression JPEG (Motion JPEG)
Video Resolution 640 x 480, 320 x 240 (default), 160 x 120
Image Quality Favor Clarity, Standard, Favor Motion
Frame rate (*1) Max. 10 frames/second (640 x 480) (*2)
Max. 30 frames/second (320 x 240)
Max. 30 frames/second (160 x 120)
Security User ID/Password
Supported Protocols TCP, UDP, IP, HTTP, FTP, SMTP, DHCP, DNS, ARP, ICMP,
POP3, NTP, DDNS
User Access Limit Max. 30 simultaneous access
Buffered Image (*3) About 560 frames (320 x 240) with time display
Network Camera
Zoom 21x Optical Zoom (10 steps)
Horizontal Viewing Angle Tele: 2.6ｰ, Wide: 51ｰ
Pan: -175ｰ to +175ｰ
Tilt: -120ｰ to 0ｰ (On the table)/
0ｰ to +90ｰ (On the ceiling)
Revolving speed Pan : Max. 300ｰ per second, Tilt : Max. 200ｰ per second
Number of Pixels 380,000 pixels (Effective Pixels)
Focus Auto/Manual (40 steps)
Minimum Object Distance Wide: 5 mm (0.2 inches)
Tele: 1 m (40 inches)
Caliber Ratio (F No.) F1.6 - 3.6
Illumination 3 - 100,000 lx
Brightness and white balance can be selected from automatic setup or manual setup.
Terminal
Interface Ethernet (10Base-T/100Base-TX)
External I/O
  1. GND
  2. DC Power Output Terminal 12 V DC Maximum of 100 mA load drive is possible.
  3. External Sensor Input Please use it by opening or GND short-circuit.
  4. External Device Control Output External Output Control window can set the External Device Control Output. It is an open collector circuit, and the maximum drawing-in current is 100 mA.
Analog Video Output terminal φ3.5 mini plug (USA Only)
General
Operation temperature: 0ｰC to +40ｰC(+32ｰF to +104ｰF)
Humidity: 20% to 80% (No Condensation)
Dimension (HWD) 140 mm (5.51 inches) x 123 mm (4.84 inches) x123 mm (4.84 inches)
(*)Only the unit
Weight 645g (1.42 lb.) (Only the unit)
Power Supply AC adapter:
Input 120 V AC
Output 12 V DC
Consumption: 12 W
 
(*1) When power line frequency is 60 Hz. Frame rate varies according to the network condition, the PC performance, the image quality and the object situation.
(*2) Scan lines may deviate when viewing moving objects with resolution at 640 x 480 because of the interlace-type CCD.
(*3) The maximum number of frames depends on the image quality and the object situation in Buffered Image.

 
  System Requirements
 
Operating System Microsoftｮ Windowsｮ 95
Windowsｮ 98/SE
WindowsNTｮ 4.0
Windowsｮ 2000
Windowsｮ Me
Windowsｮ XP
Web browser Internet Explorer 5.0 or later Netscape Navigator ｮ 4.7
Note: The Network Camera screen is not displayed correctly on Netscape ｮ v6.x.
 
(*) Pentium ｮ II 300 MHz or greater CPU is recommended to prevent performance degradation.