KX-HCM250 Wireless

 
  • Wireless system based on IEEE 802.11b
  • Remote Pan/Tilt operation
  • Easy Installation, Easy Monitoring
  • Multi-Camera screen
  • External I/O
  • Saving image
  • "Transfer in the Alarm mode",
    "Transfer in the Timer mode"
  • Viewnetcam.com compatible. "NEW"
    (FREE DDNS Service)
  • Viewing still images on your mobile phone "NEW"
  1. Wireless system based on IEEE 802.11b
    "Wireless" Network Camera KX-HCM250(Wireless type) is also included wireless system based on IEEE 802.11b. The wireless system allows you to install easily indoor where you couldn't install with hard wiring.

     
  2. Remote Pan/Tilt operation
     
    • A wealth of Network Camera control functionsWith the "Pan/Tilt operation" that changes the Network Camera direction, you can control the Network Camera and monitor from remote locations. Also, the following functions are included.
       
    • Click to Center When you click any certain point on the Single Camera screen, that point is centered on the screen.(*1)
       
    • Pan ScanYou can move the Network Camera in a horizontal direction.
       
    • Tilt ScanYou can move the Network Camera in a vertical direction.
       
    • Preset Positioning(*2)Preset Positioning allows you to fix the Network Camera in a specific direction.
       


     

  3. Easy Installation (Having Integrated web server built-in)
    With "Integrated web server" built-in, you can connect to the Internet or LAN directly without devices to send images. Only connects a power supply and 10 Base-T Ethernet.

     
  4. Easy monitoring (Monitoring by web browser on the network)
    You can view camera images easily after entering the Network Camera IP address in the web browser. You don稚 need to install or set special software.

     
  5. External I/O
    The Alarm mode in the Image Transfer feature requires that external sensors/devices be connected to the External Sensor Input of the External I/O. You can transfer images as the sensor is detected when set to "Transfer in the Alarm mode".

     
  6. Multi Camera Screen
    "Multi camera" function(*3) that monitors 4 Network Cameras at a time on the browser window. Requires no software or operations that enter the address to switch among cameras.

     
  7. Saving image
    You can save about 80 frames (*4) to the integrated memory. You can save images to specify a day of the week, time and refresh interval of recording.


     
  8. Transfer mode
    "Transfer in the Alarm mode"
    • Transferring the image via e-mail or FTP when the alarm trigger is active.
       
    • Notifying by e-mail without transferring the image.
       

    "Transfer in the Timer mode"

    • Transferring the image via e-mail or FTP when the timer trigger is active. The timer trigger can be activated by entering the active time on the Image Transfer window.
       
    • The timer mode uses the Network Camera internal clock. Please make sure Date and Time have been configured.
       



     

  9. Viewnetcam.com compatible (FREE DDNS service) "NEW"
    You can get your personal web address for your Panasonic Network Camera.
    It's FREE of charge! Please access www.viewnetcam.com for more information.


     
  10. Viewing still images on your mobile phone "NEW"
    A compatible mobile phone allows you to view still images over the Internet as well as control the motion of the camera.
    Please refer to the technical information for more details.


    (*1) Only range of movement(Right and left: ｱ 60ｰ , up and down: 0- -45ｰ)
    (*2) You can set 8 directions for PC. You need to set these in the PC prior to use.
    (*3) You can use after first registering the address of another Network Camera to that Network Camera.
    (*4) At a resolution of 320x240 in standard mode (When the file size is 13KB per image)
     
 
 
 
 
Server
Product Types integrated web server Network Camera Outdoor type
Video Compression JPEG/3 Levels
Video Resolution 640 x 480, 320 x 240, 160 x 120
Image Quality Favor Clarity, Standard, Favor Motion
Frame rate (in 60 Hz) Max. 15 frames/second (320 x 240, 160 x 120)
Max. 7.5 frames/second (640 x 480)
Security User ID/Password
Supported Protocols TCP, UDP, IP, HTTP, FTP, SMTP, DHCP, DNS, ARP, ICMP, POP3, NTP
User Access Limit Max. 30 simultaneous users
Buffered Image About 560 frames (320 x 240) with time display
Network Camera
Horizontal Angle Right and left 45ｰ (totally 165ｰ by Pan operation)
Vertical Angle Up and down 33ｰ (totally 78ｰ by Tilt operation)
Pan - 60ｰ to + 60ｰ
Tilt 0ｰ to - 45ｰ
Number of Pixels 320,000 pixels
Lens Focus: Fixed 1 m -Infinity, Caliber Ratio (F No.) F1.8
Illumination 10-10,000 lx Brightness, White balance Auto/Manual
Terminal.
Interface 10 Base-T Ethernet
External I/O External Sensor Input: 1
External Device Control Output: 1
Wireless
Protocol IEEE802.11b
Number of channels 11 channels
Communication speed 1, 2, 5.5, 11 Mbps and Auto
Communication distance 2-400 feet (about 0.6-120m) indoors /sight distance
2-2000feet (about 0.6-600m) outdoors /sight distance
Security WEP (40/128 bit)/SSID
General
Environment Temperature -4ｰF to +122ｰF (-20 ｰC to +50ｰC)
Humidity: 20 % to 90 %
Dimension (HWD 4.57" (116 mm) 4.57" (116 mm) 3.46" (88 mm)
Only the unit (excludes protruding objects)
Weight 1.26 lb (570 g) (Only the unit )
Power Supply AC adapter Code length 10 m
Input 120 V AC, 60 Hz Output 12 V DC, 780 mA
Consumption 7.5 W
System Requirements
Operating System Microsoft ｮ Windows ｮ 95
Microsoft Windows 98/SE
Microsoft Windows NT ｮ 4.0
Microsoft Windows Me
Microsoft Windows 2000
Microsoft Windows XP
Web browser Internet Explorer 5.0 or later
Netscape Navigator ｮ 4.7 (*1)


    (*1)   The Network Camera image is not displayed correctly on the Netscape ｮ v6.x.
  • Microsoft, Windows and Windows NT, are either registered trademarks or trademarks of Microsoft Corporation in the United States and other countries.
  • product names are trademarks or registered trademarks of their respective companies.
  • Specifications, outline view and standard are subject to change without notice.