KX-HCM10  


 
  • Remote Pan/Tilt operation
  • Easy Installation, Easy Monitoring
  • Multi-Camera screen
  • External I/O
  • Saving image
  • "Transfer in the Alarm mode",
    "Transfer in the Timer mode"
  • Viewnetcam.com compatible. "NEW"
    (FREE DDNS Service)
  • Viewing still images on your mobile phone "NEW"
  1. Remote Pan/Tilt operation
     
    • A wealth of Network Camera control functionsWith the "Pan/Tilt operation" that changes the Network Camera direction, you can control the Network Camera and monitor from remote locations. Also, the following functions are included.
       
    • Click to Center When you click any certain point on the Single Camera screen, that point is centered on the screen.(*1)
       
    • Pan ScanYou can move the Network Camera in a horizontal direction.
       
    • Tilt ScanYou can move the Network Camera in a vertical direction.
       
    • Preset Positioning(*2)Preset Positioning allows you to fix the Network Camera in a specific direction.
       


     

  2. Easy Installation (Having Integrated web server built-in)
    With "Integrated web server" built-in, you can connect to the Internet or LAN directly without devices to send images. Only connects a power supply and 10 Base-T Ethernet.

     
  3. Easy monitoring (Monitoring by web browser on the network)
    You can view camera images easily after entering the Network Camera IP address in the web browser. You don稚 need to install or set special software.

     
  4. External I/O
    The Alarm mode in the Image Transfer feature requires that external sensors/devices be connected to the External Sensor Input of the External I/O. You can transfer images as the sensor is detected when set to "Transfer in the Alarm mode".

     
  5. Multi Camera Screen
    "Multi camera" function(*3) that monitors 4 Network Cameras at a time on the browser window. Requires no software or operations that enter the address to switch among cameras.

     
  6. Saving image
    You can save about 80 frames (*4) to the integrated memory. You can save images to specify a day of the week, time and refresh interval of recording.


     
  7. Transfer mode
    "Transfer in the Alarm mode"
    • Transferring the image via e-mail or FTP when the alarm trigger is active.
       
    • Notifying by e-mail without transferring the image.
       

    "Transfer in the Timer mode"

    • Transferring the image via e-mail or FTP when the timer trigger is active. The timer trigger can be activated by entering the active time on the Image Transfer window.
       
    • The timer mode uses the Network Camera internal clock. Please make sure Date and Time have been configured.
       



     

  8. Viewnetcam.com compatible (FREE DDNS service) "NEW"
    You can get your personal web address for your Panasonic Network Camera.
    It's FREE of charge! Please access www.viewnetcam.com for more information.


     
  9. Viewing still images on your mobile phone "NEW"
    A compatible mobile phone allows you to view still images over the Internet as well as control the motion of the camera.

    (*1) Only range of movement(Right and left: ｱ 60ｰ , up and down: 0- -45ｰ)
    (*2) You can set 8 directions for PC. You need to set these in the PC prior to use.
    (*3) You can use after first registering the address of another Network Camera to that Network Camera.
    (*4) At a resolution of 320x240 in standard mode (When the file size is 13KB per image)
     
 
 
 
Main Specification
Interface 10 Base-T Ethernet RJ-45 connector x 1
Video Compression JPEG/3 Levels
Video Resolution 640 x 480, 320 x 240 (default), 160 x 120
Frame rate (in 60 Hz) Max. 15 frames/second (320 x 240, 160 x 120)
Max. 7.5 frames/second (640 x 480)
Supported Protocols TCP, UDP, IP, HTTP, FTP, SMTP, POP3, DHCP,DNS,DDNS,ARP,ICMP,NTP
Operating System Microsoft ｮ Windows 95 ｮ
Microsoft Windows 98/SE
Microsoft Windows 2000
Microsoft Windows Me
Microsoft Windows NT ｮ 4.0
Microsoft Windows XP
Web browser Internet Explorer 5.0 or later
Netscape Navigator ｮ 4.7
Note: The Network Camera screen is not displayed correctly on Netscape ｮ v6.x.
User Access Limit Max. 10 simultaneous users
Mounting methods Wall Mounting/Camera Stand Mounting/Ceiling Mounting
Dimension (HWD) 116 mm (4.57") x 115 mm (4.57") x 72 mm (2.83") (*)Only the unit
Weight 350g (0.77 lb.) (Only the unit)
Power Supply AC adapter code length: 5m
Input 120 V AC, 60 Hz Output 9 V DC (USA)
Input 100-240 V AC, 50/60 Hz Output 9 V DC (Other)
Consumption Standby: 6 W, MAX.8 W
Environment Operating temperature: +5ｰC to +40ｰC
Storage temperature: 0ｰC to +50ｰC
Operating humidity: 20% to 80% (No Condensation)
Storage humidity: 20% to 90% (No Condensation)
Network Camera Specifications
Pan/Tilt Angle Pan: - 60ｰ to + 60ｰ, Tilt: 0ｰ to - 45ｰ
Sensor Type 1/3 inch CMOS
Number of Pixels 320,000 pixels (Effective Pixels)
Illumination 10-10,000 lx
White Balance Auto/Manual/Hold
Focus Fixed 1 m-Infinity
Caliber Ratio (F No.) F1.8
Exposure Auto
Horizontal Angle Right and left 45ｰ (totally 165ｰ by Pan Operation)
Vertical Angle Up and down 33ｰ (totally 78ｰ by Tilt Operation)
Other Specifications
Security ID/Password
Image Transfer Condition Timer: Day/Hour/Minute/Second
Alarm: External Sensor Input
Image Transfer Method SMTP, FTP
Buffered Image About 80 frames (320 x 240) with time information
Magnification 100% or 150%
Update Firmware
 		 Available from Network Camera Technical Support Site
Message Transfer Condition When alarm is detected
Message Transfer Method SMTP

 
  • Microsoft, Windows and Windows NT, are either registered trademarks or trademarks of Microsoft Corporation in the United States and other countries.
  • Product names are trademarks or registered trademarks of their respective companies.
  • Specifications, outline view and standard are subject to change without notice.
 
 

The Alarm mode in the Image Transfer feature requires that external sensors/devices be connected to the External Sensor Input of the External I/O. You can transfer images as the sensor is detected when set to Transfer in the Alarm mode .

       The explanation of external I/O

 
Pin Features
     1.      GND
     2.       DC Power Output Terminal
   8-12 V DC
   Maximum of 50 mA load drive is possible.
     3.       External Sensor Input
   Please use it by opening or GND short-circuit.
     4.       External Device Control Output
   External Output Control window can set the External Device
     Control Output.
   It is an open collector circuit, and the maximumdrawing-in current
     is 50mA.
 
      Circuit Diagram Example

 
CAUTION
   THE EXTERNAL I/O IS NOT CAPABLE OF CONNECTING DIRECTLY TO DEVICES THAT REQUIRE LARGE AMOUNTS OF CURRENT. IN SOME CASES, A CUSTOM INTERFACE CIRCUIT MAY HAVE TO BE USED. SERIOUS DAMAGE TO THE NETWORK CAMERA MAY RESULT IF A DEVICE IS CONNECTED TO THE EXTERNAL I/O THAT EXCEEDS ITS ELECTRICAL CAPABILITY.

 
  • Do not short-circuit DC power(2 pin) and GND(1 pin). Short the Network Camera power and incorrect wiring could damage the Network Camera.
     
  • If you have any questions, please contact the authorized Network Camera dealer.